启动找不到armada-3720-customer0.dtb
启动显示如下，卡在Starting kernel ...不动，大家帮我看看是什么原因TIM-1.0
WTMI-armada-17.10.1-
ENTER init_ddrgen
DDR_TOPOLOGY is 0 : DDR3, 1CS 512M
WTMI_CLOCK=2
Fill memory before self refresh...done
Now in Self-refresh Mode
Restore CAS Read and Write Latency
Restore termination values to original values
Exited self-refresh ...
DLL TUNING
==============
DLL 0xc0001050:
DLL 0xc0001050:
DLL 0xc0001054:
DLL 0xc0001054:
DLL 0xc0001074:
DLL 0xc0001074
U-Boot 2017.03-armada-17.10.1 (Nov 30 2017 - 17:27:47 +0800)
Model: Marvell Armada 3720 for Eli Cat
CPU @ 1000
L2 @ 800
TClock @ 200
DDR @ 800
I2C: ready
DRAM:512 MiB
U-Boot DT blob at : 000000001f73a520
SF: Detected GD25LQ64C with page size 256 Bytes, erase size 4 KiB, total 8 MiB
MMC: for ssg ledsdhci@d8000: 0
** File not found boot/armada-3720-customer0.dtb **
test_mmc_ext4_exist ==1
Comphy-0: UNCONNECTED
Comphy-1: UNCONNECTED
Comphy-2: UNCONNECTED
gpio: pin GPIO23 (gpio 39) value is 1
** File not found boot/armada-3720-customer0.dtb **
Enter Recovery mode
SCSI:Hit any key to stop autoboot:0
SF: Detected GD25LQ64C with page size 256 Bytes, erase size 4 KiB, total 8 MiB
device 0 offset 0xcc000, size 0x434000
SF: 4407296 bytes @ 0xcc000 Read: OK
gpio: pin GPIO21 (gpio 37) value is 1
gpio: pin GPIO22 (gpio 38) value is 1
Error: inflate() returned -3
device 0 offset 0xc8000, size 0x4000
SF: 16384 bytes @ 0xc8000 Read: OK
## Flattened Device Tree blob at 04f00000
Booting using the fdt blob at 0x4f00000
Using Device Tree in place at 0000000004f00000, end 0000000004f05caa
Starting kernel ...
是不是U盘更新X3P。确认一下引出来开的U口是否稳定。我用U盘刷也卡在这里，蓝色灯闪烁。最后没办法用TTL刷的，到刷full.bin死活不行，最后换了机箱上前置USB面板的线成功了。 回忆感觉卡starting kernel 不知道是不是线的问题。很奇怪前几补刷uboot没问题，就在刷full.bin时一直不成功。不知道是不是 bubt full.bin spi usb刷uboot有什么特别的 U盘口在电脑上试过了，没问题 没找到其他方法，只能拆下编程器写好再焊回去了 我也是碰到这个问题 求解~~~同样问题
不懂帮顶 楼主解决了吗？求指导~
页:
[1]
2